接链环受力分析与结构优化

link chain
    Analyzing the Strength and Optimizing the Structure of the Link Chain 
    接链环受力分析与结构优化
短句来源
    The chain transmission is widely applied to the mining transporting equipment, the link chain is the core that the whole equipment works normally.
    链传动广泛地应用在采矿运输设备中,接链环是整个设备正常工作的核心。
短句来源
    Base on the elasticity contact and deformation theory, study the contact load and deformation of the pin and the link chain.
    运用弹性接触和变形协调理论,研究销与接链环的接触受力及其形变。
短句来源
    Taking 30×108 link chaion of the mining flat type with arc tooth for model when it is loaded the up most pulling force, calculating the connecting strength that of the link chain, analyzing the strength situation of he link chain.
    对30×108矿用弧形梯齿扁平接链环在承受最大拉力的情况下进行分析,算出接链环所受到的力,分析接链环的受力情况。 



    The article makes a three-dimensional analysis of the flat type connector units for mining round link chain in static load on the condition of thinking about stage nonlinear of the structure by using big collegiate finite element analysis software—ANSYS, and the structural Von miss stress distribution of ladder tooth connector units is calculated by finite element method, and then the understanding with the distributed of the stress of the joggling teeth may have very big function to guarantee the connector units with reasonable configuration .
    应用大型有限元分析软件ANSYS对梯齿形扁平接链环在承受静载荷的状态下,进行了基于考虑结构接触非线性的三维有限元分析,初步计算了梯齿型结构扁平接链环的应力分布情况,而了解齿型接链环啮合部位的应力分布情况,对于从设计角度来保证接链环具有合理的结构形式会有很大的作用。 
  
  chain connector
    The fracture analysis of φ30×108 chain connector 
    φ30×108接链环的疲劳断裂分析 
  the link chain
    Analyzing the Strength and Optimizing the Structure of the Link Chain 
    接链环受力分析与结构优化 
    The chain transmission is widely applied to the mining transporting equipment, the link chain is the core that the whole equipment works normally.
    链传动广泛地应用在采矿运输设备中,接链环是整个设备正常工作的核心。 
    Base on the elasticity contact and deformation theory, study the contact load and deformation of the pin and the link chain.
    运用弹性接触和变形协调理论,研究销与接链环的接触受力及其形变。 
    Taking 30×108 link chaion of the mining flat type with arc tooth for model when it is loaded the up most pulling force, calculating the connecting strength that of the link chain, analyzing the strength situation of he link chain.
    对30×108矿用弧形梯齿扁平接链环在承受最大拉力的情况下进行分析,算出接链环所受到的力,分析接链环的受力情况。
短句来源
  connecting chain
    The manufacture of flat connecting chain used in mine of φ34×126 sawtooth 
    φ34×126矩齿型矿用圆环链用扁平接链环的研制